Page 1 of 1

4 WHEEL PARTS CAD Event

PostPosted: September 15th, 2013, 5:15 pm
by Beck*A*Poo

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 15th, 2013, 6:07 pm
by Lake_v2
:dontknow:

That hapened?

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 15th, 2013, 6:39 pm
by Beck*A*Poo
:Thumb:

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 15th, 2013, 7:19 pm
by munepit
Nice flex Becca! That grey XJ is sweet! Matt could be a highlin walker. Pretty ballsy! Sucks I missed all the fun.

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 9:19 am
by ScottyMaxx
Had a blast!!! I got a few pics and vids that I need to get uploaded. Also the Moderate trail run I lead for the event went fairly smooth. I lead about 25 rigs. Mikey was at the back thankfully and had to help one jeep with overheating troubles. We stayed in contact and never got separated too bad. But other than that it went smooth.

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 9:24 am
by Beck*A*Poo
[quote="ScottyMaxx"]Had a blast!!! I got a few pics and vids that I need to get uploaded. Also the Moderate trail run I lead for the event went fairly smooth. I lead about 25 rigs. Mikey was at the back thankfully and had to help one jeep with overheating troubles. We stayed in contact and never got separated too bad. But other than that it went smooth.[/quote]


how long did your trail run for.... Someone said aarons went for 2 hours ... I wanted to go on a trail with you all but after raffle i was done for the weekend lol

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 9:33 am
by Uncle Cracker
:wings: i had a great time, got tons of body damage, broke 2 of my
favorite cocktail glasses, bent a shift fork in my transmission, got drunk,
did some things i may or may not remember :mrgreen:
hugged all the ladies, enjoyed the neon ta-ta parade,
and stayed up waaaaaaaaay past my bed time.

i don't know how you people do it :sick: but thanks for having me :thankyou:












P.S. i thought the "cliniques" went well considering some folks condition on sunday
:drunkbuds: :sick:

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 9:35 am
by Beck*A*Poo
ROshy.... you left your pups water bowl.... we have it

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 9:39 am
by Uncle Cracker
oh, thank you baby

i found one, but hadn't un-packed anything , so i didn't miss it yet.

oooooweee i tell you what,,,,,,,,i slept like a drunk baby last night :owned:

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 9:46 am
by Beck*A*Poo
lol... I think matt did too...he was beat.... :P

But yea ill bring it to u the next time i see ya

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 9:53 am
by Beck*A*Poo
WE also had a awesome time....:) I think this year was the best and Jeff missed out big time.....

With us drinkin, neon tatas, booty shaking , boob grabbing, the snake walking on winch line (drunK) and all the stacking and crazy rides at night, fireworks, sobe bombs .... oh cant forget that OPIE got a taste of the whitesnake ...

It was a blast this year...

Oh and i cant forget aaron (floppy) taught his baby to pole dance lol .... was a fun ass time with everyone....new and old.... :drinks:

Infectious throws the best partys....

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 10:34 am
by 81BigBrett
I had a time, and met some great people. I can't wait till the next one.

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 11:51 am
by Uncle Cracker
i think the "neon tatas" ought to be at all M&G's

are there no pics of glowing tatas :redX:

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 12:31 pm
by ScottyMaxx
[quote="Beck*A*Poo"][quote="ScottyMaxx"]Had a blast!!! I got a few pics and vids that I need to get uploaded. Also the Moderate trail run I lead for the event went fairly smooth. I lead about 25 rigs. Mikey was at the back thankfully and had to help one jeep with overheating troubles. We stayed in contact and never got separated too bad. But other than that it went smooth.[/quote]


how long did your trail run for.... Someone said aarons went for 2 hours ... I wanted to go on a trail with you all but after raffle i was done for the weekend lol[/quote]
Our group got back about 20-30min before Floppys. We did at least a 1.5hr run.. The couple times we stopped everyone was super nice and thankful for the club putting on the runs. I think everyone that signed up showed.

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 1:08 pm
by Beck*A*Poo
Our group got back about 20-30min before Floppys. We did at least a 1.5hr run.. The couple times we stopped everyone was super nice and thankful for the club putting on the runs. I think everyone that signed up showed.[/quote]


Thats cool....Glad you guys were able to run the trail runs.... Lets hope they all sign up or join our club :).....

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 1:10 pm
by Beck*A*Poo
[quote="Uncle Cracker"]i think the "neon tatas" ought to be at all M&G's

are there no pics of glowing tatas :redX:[/quote]


LOL.... have no idea if anyone took them lol ....since there were only me and floppys better half wearing them

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 3:45 pm
by Repsolaaron
I had a lot of fun. I got a lot of body damage too and broke a motor mount which bent my shift linkage. Now I have to get mikey to put me in 4 wheel. Also I learned a 6bt can fit in a xj.

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 5:39 pm
by Desert Dog
Drunk enough to use a tent as a sleeping bag????

[attachment=1]no poles (600x800).jpg[/attachment]


The 4WPs Bako guys can party!

[attachment=0]sick (800x600).jpg[/attachment]

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 5:40 pm
by Dirty LJ
As always had a fantastic time with the IOR Crew!!!

Special thanks to everyone that came out and helped make this event a total success! It was a group effort and we couldn't have done it without you.

Thank you to:
Becca and MFDD for all of the hard work they did behind the scenes putting this thing together!
MFDD for putting on the CB & Ham tuning booth
Matt, Josh, Becca, Roger, AJ and any others I missed for putting on the Winch/High Lift/Tire Plug Demos!
Aaron, Brett, James, Scotty and Mikey for leading the trail runs!
All of the guys and gals that did the Tug of war, even though you let 4WP win!

I know that there are more that really helped I just don't remember what everyone did. :oops: Blame it on the large amounts of alcohol consumed. :drinks:

The neon boobie parade was awesome (and you guys poked fun of me for bringing the neon :bleh: ) Other than the burning Whitesnake last year I think this was the best collection of sobe bombs we have had. I still wish I had my camera out for Emilys near death experience! She was asking for a shot of fireball. I think she got more than she bargained for that time.

Aaron park further from the fire pit next time so we are not in danger of burning down your tow rig :shave:

I enjoyed taking some new people on Henry's Crack for the "Black Diamond" run. I had 8 rigs including a stock Grand Cherokee that did surprisingly well! Most of the people I took on that run had been all over out there and were really excited to see something new and really fun.

I have some pictures and video that I will start uploading soon.

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 16th, 2013, 5:57 pm
by Lake_v2
Thanks 4Wheelparts for the customer appreciation and recognition of the club.

Doing the demos was fun and a different experience hope to do it again next year even better than this year.

It was great hanging out with everyone and wheeling.

Only damage we suffered for the weekend was a gutter on the house and body damage on side of camper... :owned:

Oh well it will buff out

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 17th, 2013, 6:48 am
by Uncle Cracker
[quote="Lake_v2"]Thanks 4Wheelparts for the customer appreciation and recognition of the club.

Doing the demos was fun and a different experience hope to do it again next year even better than this year.

It was great hanging out with everyone and wheeling.

Only damage we suffered for the weekend was a gutter on the house and body damage on side of camper... :owned:

Oh well it will buff out[/quote]



:lol: a gutter on the side of the house :lol3:

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 17th, 2013, 10:06 am
by Desert Dog

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 17th, 2013, 10:35 am
by AJ99
Damn had a great time! Left Sunday before anyone else just because I was so worn out. Plus my jeep took a beating Saturday night lol. Time to rebuild it and make it stronger lol.

Re: 4 WHEEL PARTS CAD Event

PostPosted: September 23rd, 2013, 2:35 pm
by Uncle Cracker
she's gonna be OK