Page 1 of 3

Hammers Dec 15th

PostPosted: November 27th, 2012, 2:24 pm
by Toycrawler5481
Here we go again!

My buddy just picked up a pretty sick buggy that we wants to take out bad! He had some things to fix so we are planning for Hammers Dec 15th! I hope to see some of you out there!

Requirements:
Disclaimer
We are all have buggies so please please very capable rigs only... No stock parts lol, We plan on running as many trails as possible without too many hold ups.Cant care about your sheet metal either haha! I understand that things happen and we have a " no man left behind rule" but we want the level of all the rigs to very capable so we can focus on wheelin and not dragging a non capable rig though.

Crazy Sammy! Calling you out buddy! Saw the video of you on Back door so I wanna see that awesome rig in person! Hope yall can make it!

Re: Hammers Dec 15th

PostPosted: November 28th, 2012, 7:39 am
by Uncle Cracker
do you think i'll qualify? :lol2: it'll be done before then ( i hope)

Re: Hammers Dec 15th

PostPosted: November 28th, 2012, 8:06 am
by abendx
IDK..... do I qualify?

If my rig isn't yet chopped up and I don't get an invite to someplace secret for that weekend, I think I am down!

I have to admit.... my rig is a driveway queen... no scratches and all shiny stock parts. :thefinger:

Can I play?



I like your disclaimer.... can I use that instead of the fucking long ass winded shit I normally use now?

Re: Hammers Dec 15th

PostPosted: November 28th, 2012, 8:09 am
by abendx
[quote="rgacord"]do you think i'll qualify? :lol2: it'll be done before then ( i hope)[/quote]

Roger.... ready for this weekend??

Re: Hammers Dec 15th

PostPosted: November 28th, 2012, 8:20 am
by Uncle Cracker
[quote="abendx"][quote="rgacord"]do you think i'll qualify? :lol2: it'll be done before then ( i hope)[/quote]

Roger.... ready for this weekend??[/quote]

i'm ready for a lot of labor on my rig :kungfu:

i wouldn't mind if IOR (as a whole)came up to beautiful tehachapi
and grabbed some wrenches and started twisting

(install radiator, brake lines, fuel lines, axle shafts, bearings/ seals, rear
calipers, and the last little bit of tubing ) shouldn't take more than an hour,,, right? :shock:

Re: Hammers Dec 15th

PostPosted: November 28th, 2012, 8:24 am
by Uncle Cracker
by the end of this weekend,,,,, MAN!! i'll be so close!!!

i know i'm gonna hurt some people by saying this, but,,,
i sold some of my guns to keep going on the truck :sick:

Re: Hammers Dec 15th

PostPosted: November 28th, 2012, 8:28 am
by abendx
[quote="rgacord"]by the end of this weekend,,,,, MAN!! i'll be so close!!!

i know i'm gonna hurt some people by saying this, but,,,
i sold some of my guns to keep going on the truck :sick:[/quote]



Umm... you bummed me out, made me happy, and pissed me off all in that order! lol


Bummed that you'll not make Cougar Buttes this weekend.

Re: Hammers Dec 15th

PostPosted: November 28th, 2012, 3:59 pm
by Toycrawler5481
[quote="rgacord"]do you think i'll qualify? :lol2: it'll be done before then ( i hope)[/quote]
One word! Yes!!!!!! Hope to see ya, ill pm u my number! Look forward to meeting u :)

Re: Hammers Dec 15th

PostPosted: November 28th, 2012, 4:28 pm
by Toycrawler5481
[quote="abendx"]IDK..... do I qualify?

If my rig isn't yet chopped up and I don't get an invite to someplace secret for that weekend, I think I am down!

I have to admit.... my rig is a driveway queen... no scratches and all shiny stock parts. :thefinger:

Can I play?



I like your disclaimer.... can I use that instead of the fucking long ass winded shit I normally use now?[/quote]
Hell ya brotha! More than welcome to use that disclaimer, figured no need to sugar coat anything, the more the merrier, just want to set a realistic expectation, havent seenn ur rig but if its hammers capable then hope to see ya! Ill pm u my info

Re: Hammers Dec 15th

PostPosted: November 29th, 2012, 10:10 am
by Crazy Sammy
HaHa well bud i cant believe it somebody has finally called me out!!!! :suprise: Finally somebody wants to play like i do!!! but hey have no fear im not scared! the one time im asked to go i have some wrench time i was doing but i should be done by then putting in my dual cases hopefully and then we will see how mean green does on the 43'' again! i will definitely try to have it all done so i can go with yall bud! keep me posted so i dont forget and it will motivate me!

Re: Hammers Dec 15th

PostPosted: November 29th, 2012, 10:13 am
by Crazy Sammy
but on another note you said capable and dependable! hell the way i have given my rig tlc it might break just getting off the trailer and it is well deserved because she has had what you could say was a little bitty bit harder than normal run or 2 put on her!! :lol2: :lol3: :clap:

Re: Hammers Dec 15th

PostPosted: November 29th, 2012, 3:20 pm
by AJ99
[quote="Crazy Sammy"]HaHa well bud i cant believe it somebody has finally called me out!!!! :suprise: Finally somebody wants to play like i do!!! but hey have no fear im not scared! the one time im asked to go i have some wrench time i was doing but i should be done by then putting in my dual cases hopefully and then we will see how mean green does on the 43'' again! i will definitely try to have it all done so i can go with yall bud! keep me posted so i dont forget and it will motivate me![/quote]


Hey man being i live so close to you if you need a hand at all let me know.

Re: Hammers Dec 15th

PostPosted: November 29th, 2012, 3:30 pm
by Crazy Sammy
THANKS FOR THE OFFER BUD WHEN IT ALL GETS HERE I WILL LET YOU KNOW! THANK YOU

Re: Hammers Dec 15th

PostPosted: November 29th, 2012, 3:32 pm
by abendx
Josh.... hurry up man!! ( <<<< motivation )

Re: Hammers Dec 15th

PostPosted: November 29th, 2012, 11:04 pm
by Toycrawler5481
[quote="Crazy Sammy"]HaHa well bud i cant believe it somebody has finally called me out!!!! :suprise: Finally somebody wants to play like i do!!! but hey have no fear im not scared! the one time im asked to go i have some wrench time i was doing but i should be done by then putting in my dual cases hopefully and then we will see how mean green does on the 43'' again! i will definitely try to have it all done so i can go with yall bud! keep me posted so i dont forget and it will motivate me![/quote]
Man!! Looking forward to it! Get mean green going so you can teach me a lesson or two! :yup:

Untill then heres a bit of backdoor motivation,
Me
http://www.youtube.com/watch?v=hG87nPtSLMQ
Mike, he will be wheeling with us on dec 15
http://www.youtube.com/watch?v=rEQPeTiv ... creen&NR=1

:Thumb:

Re: Hammers Dec 15th

PostPosted: November 29th, 2012, 11:08 pm
by Toycrawler5481
[quote="Crazy Sammy"]but on another note you said capable and dependable! hell the way i have given my rig tlc it might break just getting off the trailer and it is well deserved because she has had what you could say was a little bitty bit harder than normal run or 2 put on her!! :lol2: :lol3: :clap:[/quote]
Haha! We r all one bolt or weld from breaking bro, it happends, my buggy is the same way, it happends, just dont want a rig on 33s with open diffs attemping sledgehammer because he has something to prove, breakage happends, as long as we all start capable, lol

Re: Hammers Dec 15th

PostPosted: November 30th, 2012, 3:06 am
by REDxj5150
[quote="Crazy Sammy"]HaHa well bud i cant believe it somebody has finally called me out!!!! :suprise: Finally somebody wants to play like i do!!! but hey have no fear im not scared! the one time im asked to go i have some wrench time i was doing but i should be done by then putting in my dual cases hopefully and then we will see how mean green does on the 43'' again! i will definitely try to have it all done so i can go with yall bud! keep me posted so i dont forget and it will motivate me![/quote]

I'll pull out one of your lines for this one: "What can I say to help?"

Re: Hammers Dec 15th

PostPosted: November 30th, 2012, 10:34 am
by Uncle Cracker
still making progress, and haven't heard of a date etched in stone for the ridgecrest run
so, , JV might happen

Re: Hammers Dec 15th

PostPosted: November 30th, 2012, 9:56 pm
by Toycrawler5481
[quote="rgacord"]still making progress, and haven't heard of a date etched in stone for the ridgecrest run
so, , JV might happen[/quote]
:clap:

Re: Hammers Dec 15th

PostPosted: December 1st, 2012, 6:22 am
by abendx
Nice Roger..... and great vids of Backdoor.

Re: Hammers Dec 15th

PostPosted: December 4th, 2012, 7:05 am
by Uncle Cracker
so close,,,, i can taste it :bleh:

Re: Hammers Dec 15th

PostPosted: December 4th, 2012, 11:20 am
by Toycrawler5481
[quote="rgacord"]so close,,,, i can taste it :bleh:[/quote]


Man!!! That looks fierce bro!!!!!!!!!! :brows: My boy with the buggy just got his rear third put together... Inchworm sent him one ton gears instead of toyota 8" :dontknow: so He should have the the front third put in by this weekend, he pick up all the goodies for the front axles, six shooters... trunion bearing eliminators so his rig is gonna be sick... Here is the buggy with the prior owner.. Just a preview... This rig is sick!!!

http://www.youtube.com/watch?v=xTmqL3B0QfA

Re: Hammers Dec 15th

PostPosted: December 4th, 2012, 1:31 pm
by Uncle Cracker
nice landing :clap: i dig the boat sides too :Thumb:

i can't wait to run with a herd of yotas.

i'm doing nick-nacks on my rig every night after work
trying to get the little shit done.
hoping to be building drive lines on sunday
then its "shake down time" :thankyou:

Re: Hammers Dec 15th

PostPosted: December 5th, 2012, 9:25 am
by Toycrawler5481
[quote="rgacord"]nice landing :clap: i dig the boat sides too :Thumb:

i can't wait to run with a herd of yotas.

i'm doing nick-nacks on my rig every night after work
trying to get the little shit done.
hoping to be building drive lines on sunday
then its "shake down time" :thankyou:[/quote]
cant wait to see how your rig performs!

Re: Hammers Dec 15th

PostPosted: December 5th, 2012, 2:55 pm
by Uncle Cracker
that make 2 of us :drinks: