Page 1 of 1

Need help with Xj injector upgrade

PostPosted: March 30th, 2016, 1:11 pm
by Moondog
I picked up some Mustang injectors from the junkyard, everything looks the same, plugs up the same, only thing different is the 4 holes instead of 1. :Thumb: Well I installed them today and now Tank sounds like he's a cammed SBC, barely idles and then revs high. I reset the computer but it won't idle or run right. :banghead: Any suggestions? It's a 92 xj 4.0

Re: Need help with Xj injector upgrade

PostPosted: April 1st, 2016, 11:44 am
by 81BigBrett
What is the injector #, from what I've read you should be using the 19# Injector, also a lot of guys will buy them re manufactured vs. getting them from the junkyard. this way they are sure that they work properly.

Also found this http://www.lunghd.com/Tech_Articles/Fue ... grades.htm

Re: Need help with Xj injector upgrade

PostPosted: April 4th, 2016, 12:38 pm
by Desert Dog
Wrong injectors.