Page 1 of 1
Synergy ball joints
Posted:
July 13th, 2013, 4:14 pmby jkaddiction
Does anyone have any feedback on the synergy ball joints. I installed mine about 4-5 months ago. I have maybe 5k miles on them and they feel worn out to me. There is about a half inch of up and down slope on the uppers and the lowers are about as loose as the oem ones I took out at 40k miles. I grease everything on a regular basis. Could I have gotten a bad batch? Thanks
Re: Synergy ball joints
Posted:
July 13th, 2013, 7:43 pmby Desert Dog
Call poly. Have part number that you got ready so they can confirm that the right part was sent. They usually have good customer service. I bet they send out new ones ASAP.
Re: Synergy ball joints
Posted:
July 14th, 2013, 7:00 amby abendx
Me's gotz or rather hadz some of those silky poly ball joint jobs.
Put about 15k on them... no issues that I recall.
I sayz... give poly a call like the dog manz recommended. Tell them your ballz are falling out of their cupz.
Re: Synergy ball joints
Posted:
July 14th, 2013, 1:55 pmby Frylock
I have atleast 20k on mine now and they are still working great.