Infectious Off-Road.com

by **bobbed burb** » May 29th, 2011, 8:57 pm

Damn that gatekeeper! No more obstructions, starting the chop, boatsides and new slider location

by **abendx** » May 30th, 2011, 5:21 am

Bad ass Mark. Keep us posted in the progress. Need any help.... let me know.

by **Desert Dog** » May 31st, 2011, 12:56 pm

Bad Ass

Are you tubing it out, or making it an APC?

by **bobbed burb** » May 31st, 2011, 3:42 pm

I'm keeping the top and windshield, not decided on the fenders, the top will be cut flush to the door line. I narrowed the body about 4" on each side and will get a square tube cage with shorty doors, the design is still in the works. The structure can't be compromised for looks. There is alot more BEER THINKING than actual labor going on.

by **munepit** » May 31st, 2011, 8:20 pm

[quote="bobbed burb"]I'm keeping the top and windshield, not decided on the fenders, the top will be cut flush to the door line. I narrowed the body about 4" on each side and will get a square tube cage with shorty doors, the design is still in the works. The structure can't be compromised for looks. There is alot more BEER THINKING than actual labor going on.[/quote]

I think it looks good the way it is. Somehow, I think my burb will look like that eventually. Cheers,,

by **VICTORG93307** » June 4th, 2011, 9:29 am

[quote="munepit"][quote="bobbed burb"]I'm keeping the top and windshield, not decided on the fenders, the top will be cut flush to the door line. I narrowed the body about 4" on each side and will get a square tube cage with shorty doors, the design is still in the works. The structure can't be compromised for looks. There is alot more BEER THINKING than actual labor going on.[/quote]

I think it looks good the way it is. Somehow, I think my burb will look like that eventually. Cheers,,[/quote]

If you ever do any wheeling. Loo

sent from HTC evo iPhone killer.

by **munepit** » June 6th, 2011, 6:06 am

No chit, its killing me. I still have a few more things to do to it. Almost there.

by **bobbed burb** » June 7th, 2011, 10:45 am

Got a little more done, time to make a run to the steel yard

by **Desert Dog** » June 7th, 2011, 1:45 pm

Ohh Yea!

by **bobbed burb** » June 7th, 2011, 3:06 pm

just an idea, wudda ya think?

by **abendx** » June 7th, 2011, 4:25 pm

Oh fuck yeah.... Mark, please collect your deposit in my drawers. :drinks:

Holy shit dude.... that is fucking epic. The LIMO crawler.

I see it now.... party in the back while you run up the Gatekeeper in two minutes flat. I assume you will have a sign up sheet, everyone is going to want to take a ride and sip a beer while you hammer through it. :stirPot:

by **abendx** » July 19th, 2011, 8:25 am

WFT Chuck!

We need updates! I am ready to see how your renewed junk is going to kick some serious ass.

by **bobbed burb** » July 20th, 2011, 11:25 am

There is alot to be done, the top is coming off and only the windshield and firewall will be left. 56" springs in the front shackle flip rear, anti wrap bars f/r, cage, blah blah blah. Most likely to be finished for fall wheelin'

by **abendx** » July 20th, 2011, 12:29 pm

Nice... ready for the October trip to Calico.

by **Desert Dog** » July 20th, 2011, 3:42 pm

Full-size diesel suburban does Scrambler Canyon, Part II.

I can't wait.

What about Tilly? Is he armoring that beast up too?

by **bobbed burb** » July 24th, 2011, 12:03 pm

No armor for tilly yet, I think he's afraid of the plasma

by **bobbed burb** » July 28th, 2011, 12:55 pm

Well here's a progress report, front removed to be narrowed, the passenger side has been chopped and tacked the angle in place. To do list, complete boatside legs and cross bracing, cut the top off, build roll cage from square tube(because I know I'll get flamed for it). Mechanical, remove engine to r/r head gaskets(turbo blew them out) timing chain, camshaft, water pump, fuel pump, injectors and glow plugs. Replace trans with a bullet proof 700r4 and a 203/205 doubler. Shackle flip rear, 56" front springs, f/r anti wrap, homebrew driveshafts and 42's with weld on double beadlocks.

by **abendx** » July 28th, 2011, 1:59 pm

Damn dude... that is a BIG ass list of to-dos! :dig:

At this rate.... you might not wheel for another five years. :thefinger:

BUT, while we still love you... pics or it didn't happen!

Hope Tilly, you, etc... roll out to Big Bear with us. And hey.... what ever happened to Maui Wowie's video at Calico? That was one hell of a camera he was carrying... he had to get some great footage.

by **bobbed burb** » July 30th, 2011, 5:11 pm

EVIDENCE!

by **bobbed burb** » August 16th, 2011, 1:56 pm

more evidence

by **bobbed burb** » August 16th, 2011, 2:03 pm

1 more

by **chuckanut105** » August 16th, 2011, 2:22 pm

Holly Hell that is one hell of an operation. I cant wait to see that thing in action.

by **abendx** » August 16th, 2011, 3:18 pm

Mark... stop posting porn. My dick is getting hard.

Looking good brother. My offer... really does stand!

by **bobbed burb** » September 13th, 2011, 8:27 pm

Removed 16 bastard rivets holding the core support and spring hangers. Tacked the new spring hanger and installed the 56" springs.

by **munepit** » September 14th, 2011, 6:05 am

I just did the same thing a couple months ago. Sure was a pain it the arse!

Infectious Off-Road.com

operation chop

operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Re: operation chop

Who is online