Page 1 of 1
burb in progress
Posted:
January 13th, 2011, 1:53 pmby bobbed burb
84 burb chopped rear windows and two feet off the rear, square tube cage, 6.2 diesel banks turbo, 14 bolt full float detroit locker, front dana 60 lincoln locked 4:56 gears, 325/85/16 military xml's, hand built tig welded stainless steel fuel tank, 2 buckets rear 2 wide buckets front, killer sound system. needs crossover high steer,hydro assist and shackle flip rear. I built this whole rig for $5500 including the price of the truck which was $1600. I bought this truck from the original owner with 172000 miles, the engine runs like a champ due to good maintenance. It currently has over 200000 miles and still no blow by starts in the freezing cold with no problems I mean 0 degrees! just added crossover and ram assist, pictures will come soon
Re: burb in progress
Posted:
January 13th, 2011, 1:55 pmby bobbed burb
the last picture is before the 14 full and dana 60
Re: burb in progress
Posted:
January 13th, 2011, 3:05 pmby munepit
Sweet!!! Another burb in the club!!!! Nice. I dont want to hang around you much though. If I do, Mine will end up looking like that!!!
Re: burb in progress
Posted:
January 13th, 2011, 3:08 pmby munepit
On second thought, I want to do that!!!!!! I NEED to do that to mine!! Here is mine.
[img]http://i933.photobucket.com/albums/ad175/jcarpenter_2010/IMG_20110110_081154.jpg[/img]
Re: burb in progress
Posted:
January 13th, 2011, 3:14 pmby munepit
Are you on CK5.com?
Re: burb in progress
Posted:
January 13th, 2011, 3:41 pmby TheBigDogg
[quote="munepit"]Are you on CK5.com?[/quote]
I might still have an account there, look for me, thebigdogg
Re: burb in progress
Posted:
January 13th, 2011, 3:42 pmby TheBigDogg
[quote="TheBigDogg"][quote="munepit"]Are you on CK5.com?[/quote]
I might still have an account there, look for me, thebigdogg[/quote]
I do, I just logged on there, I use to have a 72 Blazer
Re: burb in progress
Posted:
January 13th, 2011, 3:48 pmby bobbed burb
[quote="munepit"]Are you on CK5.com?[/quote]
negative but been wanting to check it out
Re: burb in progress
Posted:
January 13th, 2011, 4:04 pmby bobbed burb
here are some more shots of the build
Re: burb in progress
Posted:
January 13th, 2011, 4:07 pmby bobbed burb
more pics
Re: burb in progress
Posted:
January 13th, 2011, 4:13 pmby bobbed burb
more
Re: burb in progress
Posted:
January 13th, 2011, 4:14 pmby munepit
Damm Thats sweet. Do you have any pics of the inside? Like, the back seat area. Looks there is a little room back there. Thanks!!
Re: burb in progress
Posted:
January 14th, 2011, 3:04 pmby casaintsfan
Re: burb in progress
Posted:
February 1st, 2011, 8:24 amby bobbed burb
a few shots of the inside
Re: burb in progress
Posted:
February 1st, 2011, 8:25 amby bobbed burb
one more
Re: burb in progress
Posted:
February 1st, 2011, 8:30 amby bobbed burb
front carrier weld process I used 1/4" and 3/8" plate
Re: burb in progress
Posted:
February 1st, 2011, 8:32 amby bobbed burb
the last picture I took. I welded across the spiders and connected to all four sides of the carrier
Re: burb in progress
Posted:
February 1st, 2011, 8:39 amby t_long927
That looks sick dude... Can't wait to see it wheel...
Re: burb in progress
Posted:
February 1st, 2011, 8:54 amby bobbed burb
1
Re: burb in progress
Posted:
February 1st, 2011, 8:58 amby t_long927
Is that out by Mesa Maran????
Re: burb in progress
Posted:
February 6th, 2011, 3:29 pmby bobbed burb
[quote="t_long927"]Is that out by Mesa Maran????[/quote] 2n17x
