Page 1 of 7

project" 3 link" finally comes to a close

PostPosted: June 5th, 2012, 3:23 pm
by Uncle Cracker
cut off the back half of the exo cage last night
pulling off the bed tonight in preparation for 3 link front and rear

Re: project" 3 link" begins

PostPosted: June 5th, 2012, 3:39 pm
by abendx
oh.... this is going to be some sex!! Nice.

project" 3 link" begins

PostPosted: June 5th, 2012, 8:11 pm
by Franeebeth
Nice ;)

Re: project" 3 link" begins

PostPosted: June 5th, 2012, 8:13 pm
by Lake_v2
Oh hell there goes the neighborhood let me know if you need an extra redneck, er hand.... Oh and why not 4 link rear?

Re: project" 3 link" begins

PostPosted: June 6th, 2012, 6:35 am
by Uncle Cracker
if i go 4 link, i'll have to move the fuel tank into the back of the truck,,,,where will i put my ice chest :beermug:
on any project, you must get your priorities
straight first :thefinger:

Re: project" 3 link" begins

PostPosted: June 6th, 2012, 6:37 am
by Uncle Cracker
here is a 3 link toyota>>>>>
that's all i want :mrgreen:

Re: project" 3 link" begins

PostPosted: June 6th, 2012, 6:47 am
by Uncle Cracker
just think>>>>>>>>>>>
no more waiting around for me
tightening my shackle bolts :Thumb:








oh and,,,,,,,,, for those members who don't have time to help out, i am excepting cash donations :mrgreen:


( still have a low mileage class A motorhome for sale "dirt cheap")

Re: project" 3 link" begins

PostPosted: June 6th, 2012, 8:45 am
by Desert Dog
Dammmmmm Roger. Your truck is going to be bad ass!

Re: project" 3 link" begins

PostPosted: June 6th, 2012, 9:24 am
by Uncle Cracker
i hope to have it back on the trail in 6 to 12 months :lol2: BUY MY MOTORHOME :dig:

Re: project" 3 link" begins

PostPosted: June 6th, 2012, 2:36 pm
by chrisrigby
hey dude dont know if you know about FOA coil overs yet but they actually make pretty decent stuff at a reasonable price. ive only seen them have issues when being raced hard and having to cycle a million times a minute. for crawling and stuff where the shock dosnt have to cycle as rapid as a desert car i bet they would do great.

Re: project" 3 link" begins

PostPosted: June 6th, 2012, 3:41 pm
by Uncle Cracker
yea,,, i looked at them and many others.
i'm ordering all my creeper joints this friday.
4 weeks after that i'll order my threaded bungs, DOM tubing, and some plate steel.
what sucks is: gotta make those house payments along the way.
at this point, i'm not sure where the hell the money is coming from to purchase the shocks, bumps, and straps :cry:


:mrgreen: BUY MY MOTORHOME :mrgreen:
"dirt cheap"

Re: project" 3 link" begins

PostPosted: June 6th, 2012, 10:09 pm
by chrisrigby
we dont do anything involving DOM at our shop but we do a ton of plate work / sheet metal stuff from 26 ga to 1 1/2 thick. give me some basic sizes your looking for and i can snag scraps and rems for ya. alot of square and rec. tube as well. for link mounting cross members and stuff.

also for shocks and bumps and stuff like that there is a huge offroad everything under the sun type expo/swapmeet a couple times a year in LA where people are trying to kick last years used stuff down the road for cheap to get this years latest greatest thing.

Re: project" 3 link" begins

PostPosted: June 7th, 2012, 6:27 am
by Uncle Cracker
any 1/4 inch plate you can snag would be fantastic :Thumb:
and if you can get a date for that 4x expo
(and buy my motorhome :lol3: )
that would be cool also





more cage removed and front sheet metal

Re: project" 3 link" begins

PostPosted: June 7th, 2012, 6:45 am
by Uncle Cracker
i know we don't have too many toyota guys in our group but,,, i have a bobbed long bed w/ cage and spare tire carrier, 63 inch chevy springs(with or without
the A-arms and piggy back shocks)
U-bolt flip kits, near new 4 inch lift axle-forward
front springs ** FOR SALE** :salute:

Re: project" 3 link" begins

PostPosted: June 7th, 2012, 7:55 am
by chuckanut105
Might know someone interested.

Re: project" 3 link" begins

PostPosted: June 7th, 2012, 8:10 am
by EJ21
Me too. let me know how much.

Re: project" 3 link" begins

PostPosted: June 7th, 2012, 2:21 pm
by chrisrigby
yeah how much

Re: project" 3 link" begins

PostPosted: June 12th, 2012, 6:41 am
by Uncle Cracker
the u-bolt flip kit has been claimed, just make me an offer on what you might want
P.S. suspension parts won't be available for a few weeks so i can move the truck around

Re: project" 3 link" begins

PostPosted: June 12th, 2012, 8:59 am
by chuckanut105
No worries Dave is out toy is acting up.

Sent from my DROIDX using Tapatalk 2

Re: project" 3 link" begins

PostPosted: June 12th, 2012, 10:01 am
by Desert Dog
[quote="rgacord"]here is a 3 link toyota>>>>>
that's all i want :mrgreen:[/quote]
That is exactly how the rear 3-link is done on my JK. You will love it!!!!

Re: project" 3 link" begins

PostPosted: June 12th, 2012, 2:03 pm
by Uncle Cracker
:freakout: :freakout: :freakout: :freakout:

i'm so excited

josh and i have been working on some ideas, along with chris (one of the owners of "west
coast") ,, i've been all over the web looking at
pro-built rigs,trying to have my sh(t together
when the money comes in. i've decided not to buy a "kit" (maybe bits or pieces).
if everything works out like i planned,,i'll be going to see richard about some ORIs

Re: project" 3 link" begins

PostPosted: June 27th, 2012, 8:43 am
by Uncle Cracker
:cry: no changes :cry: no money (yet) :banghead:

Re: project" 3 link" begins

PostPosted: October 8th, 2012, 2:00 pm
by Uncle Cracker
:? it's been a long time since any changes

this weekend i stripped all the accessories
off the motor and replaced the broken timing chain cover, repaired all the oil leaks.
trimmed the hood, and cut off the old shock towers. more cutting next weekend :dig:





oh,, by the way, the transmission housing on the 4runner is cracked,,,bleeding right out the side :cry: anybody have a 4L60E housing laying around

Re: project" 3 link" begins

PostPosted: October 8th, 2012, 4:23 pm
by Lake_v2
Collateral damage from engine mounts?, i may know of a good core 4l60, if willing to swap parts from one case to another

Re: project" 3 link" begins

PostPosted: October 9th, 2012, 2:08 pm
by Uncle Cracker
not touching the 4runner until after my truggy is done>>> no. 1 priority in life right now :owned: