Infectious Off-Road.com

more broken chromolly[attachment=2]NCM_0270.JPG[/attachment] right front and right rear[attachment=1]0121130621a.jpg[/attachment] and rear diff[attachment=0]NCM_0272.JPG[/attachment]

this shit is getting painful

both axles warrantied, but not the R&P

Good God! How did you do that?!?!

Sent from my SM-G900V using Tapatalk

Get a G2 gear from 4wp add in house warr. You won't have to buy the next one.
And use solid pinion spacer kit if your 3rd doesn't have one.
Running spool diff carriers it will happen again w/40"s

[quote="Burrt"]Get a G2 gear from 4wp add in house warr. You won't have to buy the next one.
And use solid pinion spacer kit if your 3rd doesn't have one.
Running spool diff carriers it will happen again w/40"s[/quote]
the in house warranty only applies if they do the install, and i'm to cheap to do that
yea, i'm running a spool, but it usually breaks the warrantied axles not r&p

[color=#40FF00] good news[/color] axles and r&p should be here before friday,
so,,, the "TinBenders Jambo" looks like it's gonna happen after all

Big tires + tiny axles = broke (both the rig and the bank account)

[quote="Desert Dog"]Big tires + tiny axles = broke (both the rig and the bank account)[/quote]


[attachment=0]NCM_0278.JPG[/attachment] still waiting on the axles.
the R&P will take 4 or 5 hrs for me to set up, the axles. 20 minutes

[quote="Uncle Cracker"][quote="Burrt"]Get a G2 gear from 4wp add in house warr. You won't have to buy the next one.
And use solid pinion spacer kit if your 3rd doesn't have one.
Running spool diff carriers it will happen again w/40"s[/quote]
the in house warranty only applies if they do the install, and i'm to cheap to do that
yea, i'm running a spool, but it usually breaks the warrantied axles not r&p[/quote]

well just tell them I installed it.warr good

[attachment=0]NCM_0281.JPG[/attachment]




don't wait for me at the parade (see anything wrong in the picture)











PS. no fucking axles yet either GEEEEEEEEZ! ! ! !

axles are in, and the correct gears have been shipped
wish me luck

Was gonna say them gears don't look right lol

[color=#00FF00][size=200]OK[/size][/color]

this is fucking [color=#FFFF00][size=200]MIND BLOWING ! ! ![/size][/color]
opened the axle box and it has 1 front, inner axle, the long side
i sent them the short side [size=200]AND[/size] a rear axle

[size=200]HOLY SHIT ! , WHO HAS A VOODOO DOLL OF ME??
QUIT POKING IT!!![/size]

[color=#FF4000][size=200]WTF[/size][/color] does my ex-wife work for these people now????

the [color=#40FF00][size=200]RIGHT[/size][/color] ring & pinion are already here, they showed up this morning
and trail gears promises mt correct axles will be here tomorrow

nice lol sounds like my last order with another couple companies where I constantly got the wrong parts. Well at least they say they are going to fix it for you.

[quote="Toy4xchris"]nice lol sounds like my last order with another couple companies where I constantly got the wrong parts. Well at least they say they are going to fix it for you.[/quote]


i have had pretty good luck with these guys, but every now and again, they all go out wheelin, and leave the fucktards in charge (just a hunch)

ya probably what happened I rarely have serious problems with vendors every now and then they slip up but usually fix it really quickly

i've been tending my rigs needs, and inspecting everything today. just finished cleaning up the inside and doing the windows, so now i can ware my white dress pants this weekend in JV


i'll install the front axle here, hopefully early tomorrow. load it on the trailer and take it back the shop in tehachapi, after i'm done setting up the heavy third member, i'll pull the rear axle shafts install the third, axles and oil, and i'm done and ready to roll.

2 new motor mounts, 2 new rear axle shafts, 1 new front shaft, 1 new ring & pinion, 1 new rear disco,1 shorten driveline, 12 new lug studs, 6 new lug nuts, 2 new 1.5 spacers
1 half gallon of locktite

[color=#00FF00][size=150]It's Johnson Valley, What could go wrong?[/size][/color]

[color=#00FF00][size=200]ALL PARTS ARE HERE ![/size][/color]

they have been removed from their boxes, inspected and are known to be the correct parts

[color=#BFFF00]WOOT WOOT[/color]

awesome good to hear you got the right ones now...

[quote="Uncle Cracker"][color=#00FF00][size=200]ALL PARTS ARE HERE ![/size][/color]

they have been removed from their boxes, inspected and are known to be the correct parts

[color=#BFFF00]WOOT WOOT[/color] [/quote]
Dammmm. Cutting it close again!

YEP,,, that's why i'm not gonna make the M&G tonight.
work at the tehachapi shop tonight, and first thing in the morning.
the rig should be totally complete before 10am friday.
then grocery shopping, cooking and packing for the jambo.
"PLEW" should be rolling into tehachapi around 4:30

when are you guys heading out, and are you camping in the same place?

[attachment=0]NCM_0285.JPG[/attachment]

Becka and I are caravanning out of town at around noon (I am stuck at work this morning). Hope to be on the lakebed by 3:30.

I don't know where the Benders are camping, but we will camp close so we can participate in the food and raffle. Call us when you get on Boone Rd.