Fab Work

[BowTieBinder]

Since I have a 68 Scout a lot of the things I have and want need to be fabricated. If anyone is interrested about getting together and thinking of some things for the dirt world, post or e-mail me(BowTieBinder)

[4LO4ME]

there is a old scout east of town next to the tracks i always see it has been setting there for about four years maybe you can make them a offer for a parts rig. if you take truxton towards the court house pass that up and keep heading east then you hop on edison hwy and follow it for about 5 miles till you get to the potatoes sheds its before them off to the left its white and missing the back door. it might be worth a try.

[Special Ed]

Hey Chris, what do you need fabbed. Being a binder owner myself I've learned to fab my own stuff. Theres just not alot of aftermarket stuff out there and if you find any it usually costs a fortune. Being a welder/ fabricator by trade nothing is impossible, and if is,I would'nt ever fess up to it anyway

[BowTieBinder]

All I really have left to do is the roll cage. A buddy of mine has a tube bender, but he is so busy building pre-runner trucks it's hard to find the time. I have 80' of 1 3/4 .062 wall to start with and I can get some 3/16 plate to do the gusset's. I may just buy a tube bender . I am a machinist by trade with a full machine shop to use but have to be carefull when I can do the work. So if you have your own welder we might be able to make some serious stuff. Give me a ring at 392-8444 and we'll talk. Thx, Chris