Infectious Off-Road.com

by **Josh JP** » March 11th, 2011, 8:05 pm

quick question. I was under the assumption that on a tire for example "325/90/16" that the "32" would be the same as 32's or 336/85/16 that they are "33's" i might be wrong but is that how it it? need to know cause im buying some wheels/tires tomorrow...

by **KAG** » March 11th, 2011, 9:42 pm

Sorry but that is NOT how it is...

Example325/60R20
325 = section width in mm
60 = aspect ratio (60% of 325 or 195mm of sidewall)
R = radial construction
20 = means you have some blinging 20 inch rims...

You tire would be 20 inches plus 195mm on either side... 195 mm equates to about 15.35 inches...
So your 325/60R20 is about 35 inches tall...

BTW - I have never, never seen a 336 tire! Nor a 325/90...

by **Josh JP** » March 11th, 2011, 10:04 pm

those are not actual tires. there is a guy selling LT325/80R16 and said he thinks he has 38s and they look only alittle bit bigger than my 33's. i just didnt think they where and where trying to figure out what size they actually where and when i wrote the question i didnt have much time to be on the net.

by **KAG** » March 11th, 2011, 10:28 pm

Those should be roughly 36 inches tall...

by **igofshn** » March 14th, 2011, 10:20 am

http://WWW.4LO.COM

36.5, basically a 37

Easy way to figure it out.

by **Goatman** » March 15th, 2011, 12:54 pm

Any tire company or seller web site will give the tire dimensions including the diameter of each tire size. For example, if the tire dimension is 32.5" diameter, it's like a 33" tire.

by **Josh JP** » March 15th, 2011, 8:16 pm

thats what i thought. well i got my wheels and tires i will just make them work :wings:

by **chuckanut105** » March 16th, 2011, 6:45 am

sawsall solves all :thefinger:

by **abendx** » March 16th, 2011, 7:44 am

[quote="chuckanut105"]sawsall solves all :thefinger:

[/quote]

I sent him a text informing him that my sawsall and sawsall skills were at his disposal. :lol3:

by **chuckanut105** » March 16th, 2011, 10:07 am

But do you have a Milwaukee Super Sawsall and the torch blades. Its 13amps of steel cutting pleasure. :lol3:

by **VICTORG93307** » March 16th, 2011, 4:14 pm

[quote="chuckanut105"]But do you have a Milwaukee Super Sawsall and the torch blades. Its 13amps of steel cutting pleasure. :lol3:

[/quote]

I need some of my sheet metal cut. I hear chris gets crazy with saw too just give him a dalean cocktail. Lol

Infectious Off-Road.com

question?????

question?????

Re: question?????

Re: question?????

Re: question?????

Re: question?????

Re: question?????

Re: question?????

Re: question?????

Re: question?????

Re: question?????

question?????

Who is online