by Lake_v2 » October 24th, 2011, 6:16 pm
It was a bit of a tight fit, the space between the fenders is 36", each seat(frame width) was 18 1/4". Massaged the fenders with my favorite hammer to make them fit.
The original van had the seat mounted with Ubolts welded through the floor. I made u shaped brackets out of square tube with a 3/8" bolt across the mount to make them still removable and no welding required.
Sitting in them is very comfortable, and will cover them with black seat covers, becca test fitted a standard bucket cover, a near perfect fit.
"Whitesnake"