Dana 30 Axle shaft

Dana 30 Axle shaft

Postby JMDBAKO » December 4th, 2012, 2:36 pm

Alright, my passenger side inner axle shaft snapped at the spline. the spline is stuck inside the diff. Anyone know how to get the spline out so i can put a new axle shaft in? never done this before. dont know crap about diffs.
JMDBAKO
Getting a little Dirty
 
Posts: 35
Joined: August 8th, 2012, 8:26 pm
Location: Bakersfield

Dana 30 Axle shaft

Postby Beck*A*Poo » December 4th, 2012, 2:44 pm

u can just take out the pumpkin and try to crow bar it out so u can stick new shaft in ...or u can just bring it by
[color=#FF0000]****** [size=150]BAD ASS GIRLS DRIVE BAD ASS JEEPS [/size]******[/color]

2000 JEEP WRANGLER TJ
User avatar
Beck*A*Poo
My bones have been replaced with sticks and rocks!
 
Posts: 1981
Joined: July 2nd, 2010, 6:39 am
Location: Bakersfield,Ca

Re: Dana 30 Axle shaft

Postby JMDBAKO » December 5th, 2012, 7:30 pm

Any chance i could bring it by along with sum beer or food and have someone walk me through it? ive been trying to tear apart the diff. but Honestly i have no clue what im doing lol :dontknow:
JMDBAKO
Getting a little Dirty
 
Posts: 35
Joined: August 8th, 2012, 8:26 pm
Location: Bakersfield

Dana 30 Axle shaft

Postby Beck*A*Poo » December 5th, 2012, 7:53 pm

shit if I learned you can to .... ;)
[color=#FF0000]****** [size=150]BAD ASS GIRLS DRIVE BAD ASS JEEPS [/size]******[/color]

2000 JEEP WRANGLER TJ
User avatar
Beck*A*Poo
My bones have been replaced with sticks and rocks!
 
Posts: 1981
Joined: July 2nd, 2010, 6:39 am
Location: Bakersfield,Ca

Re: Dana 30 Axle shaft

Postby REDxj5150 » December 6th, 2012, 2:29 am

Nothing holds those axle shafts into the differential. You can pop the broken splines out through the tube and get a magnet on a stick to pull it out of the tube, or you can pop the carrier out, buy the inner seal, put it in and run a 1 piece inner shaft. I actually have an entire kit that came with my chromos that you can just have. it comes with the cover for your vacuum disconnect and the seals necessary to do it.
Travis, the one person clique.
User avatar
REDxj5150
I work to support my 4X4!
 
Posts: 850
Joined: June 10th, 2008, 1:51 pm
Location: Rosedale

Re: Dana 30 Axle shaft

Postby AJ99 » December 6th, 2012, 9:06 pm

hey jake travis said the same thing i did when i was at your house lol... :thefinger:
[color=#00FF00]"Jeeps and girls are alot alike, both get mad when you call them the "c word", both like to be rode hard, both of them are hard to control... Hell, the only difference between them is you can only fix one with a hammer." [/color]
User avatar
AJ99
I work to support my 4X4!
 
Posts: 786
Joined: August 13th, 2009, 3:02 pm
Location: Bakersfield

Re: Dana 30 Axle shaft

Postby JMDBAKO » December 7th, 2012, 1:18 pm

[quote="REDxj5150"]Nothing holds those axle shafts into the differential. You can pop the broken splines out through the tube and get a magnet on a stick to pull it out of the tube, or you can pop the carrier out, buy the inner seal, put it in and run a 1 piece inner shaft. I actually have an entire kit that came with my chromos that you can just have. it comes with the cover for your vacuum disconnect and the seals necessary to do it.[/quote]

I tried the magnet thing, the spline is stuck pretty good. i tried taking the carrier out, but I have no clue what im doing :thinking: and I wanna do the 1 piece but all i can find at the junk yards is vacuum disco.
JMDBAKO
Getting a little Dirty
 
Posts: 35
Joined: August 8th, 2012, 8:26 pm
Location: Bakersfield


Return to 1984-2001 XJ

Who is online

Users browsing this forum: No registered users and 0 guests

cron