Well I installed them today and now Tank sounds like he's a cammed SBC, barely idles and then revs high. I reset the computer but it won't idle or run right. 
Any suggestions? It's a 92 xj 4.0Need help with Xj injector upgrade
3 posts
• Page 1 of 1
Need help with Xj injector upgrade
by Moondog » March 30th, 2016, 1:11 pm
I picked up some Mustang injectors from the junkyard, everything looks the same, plugs up the same, only thing different is the 4 holes instead of 1. Well I installed them today and now Tank sounds like he's a cammed SBC, barely idles and then revs high. I reset the computer but it won't idle or run right. Any suggestions? It's a 92 xj 4.0
Well I installed them today and now Tank sounds like he's a cammed SBC, barely idles and then revs high. I reset the computer but it won't idle or run right. Any suggestions? It's a 92 xj 4.0- Moondog
- I'm New Don't Hurt me
- Posts: 8
- Joined: June 30th, 2015, 11:57 am
Re: Need help with Xj injector upgrade
by 81BigBrett » April 1st, 2016, 11:44 am
What is the injector #, from what I've read you should be using the 19# Injector, also a lot of guys will buy them re manufactured vs. getting them from the junkyard. this way they are sure that they work properly.
Also found this http://www.lunghd.com/Tech_Articles/Fue ... grades.htm
Also found this http://www.lunghd.com/Tech_Articles/Fue ... grades.htm
[color=#FF0000]1997 Jeep TJ, 3.25" Rough country lift, 31" BFG All Terrains, and hopefully a lot more mods to come. [/color]
[color=#8000FF]THE ANGRY BLUEBERRY[/color]
[color=#8000FF]THE ANGRY BLUEBERRY[/color]
-
81BigBrett - I use mud for toothpaste
- Posts: 297
- Joined: March 14th, 2013, 8:31 am
- Location: Santa Paula, CA
Re: Need help with Xj injector upgrade
by Desert Dog » April 4th, 2016, 12:38 pm
Wrong injectors.
I AM THE TITTY MASTER
-
Desert Dog - Offroad Prophet
- Posts: 3268
- Joined: November 29th, 2009, 7:42 pm
- Location: da dale
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests