4 WHEEL PARTS C.A.D. event planning thread

A place for Off-Road related discussions.

4 WHEEL PARTS C.A.D. event planning thread

Postby Desert Dog » August 13th, 2013, 7:37 am

4 Wheel Parts has fired the guy they hire for trail runs and demonstrations at their events due to lack of interest in what he has to offer.

They asked IOR if we could step up and do some trail runs and demos for the event. I think this is a fantastic opportunity for IOR to get some great exposure and free marketing.

I already told Frank that I would do free CB tuning at the event and that IOR would lead a run through Henry's Crack. But more activities need to be planned, and our plans need to be submitted to them ASAP.

Please remember, they have asked that all of our planned events/demos be very professionally done and with good safe equipment. Don't do a winch demo with a barely working winch that won't free-spool and frayed line (probably should not use steel cable around a crowd for safety reasons). Don't do a recovery demo if you don't know how to rig properly. Don't lead a run when you are not familiar with the trail. Don't do a trail-welding demo if you can't weld or set up the proper safety barriers to protect bystanders, don't lead a trail run drunk, etc.

This will be our official list of event volunteers. If you are volunteering to lead a run or put on a demo, please list the full details of what you plan to do, as they will ask me when I submit our plan to them;

Desert Dog = Free CB tuning. Will bring a couple SWR meters with all wiring adaptors. Will bring tools to tune antennas and accessories to make better power and ground connections if needed.

Whitesnake = Tire plugging demo. Will bring tire repair kit, plenty of plugs, and an old tire to do the demonstration with. Also interested in doing a recovery rigging demo (hopefully doesn't plan on driving Becka's jeep for that :stirPot: )

Roger = a demo on how to break a whole bunch of shit fast.
I AM THE TITTY MASTER
User avatar
Desert Dog
Offroad Prophet
 
Posts: 3268
Joined: November 29th, 2009, 7:42 pm
Location: da dale

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Lake_v2 » August 13th, 2013, 8:17 am

Myself and becca will have a small booth for the following

Trail jack, use, maintain, demo

Trail tire fix, plug sidewalls, ill bring old junk tire for multiple uses

Winch rigging, safety, recovery tips

Can use an extra hand with winch stuff
"Whitesnake"
Lake_v2
I work to support my 4X4!
 
Posts: 943
Joined: October 5th, 2010, 10:53 am

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby abendx » August 13th, 2013, 8:18 am

I'll have to consider what I can bring to the table or might just assist. I'll do my best to make this run.

This indeed is a great marketing.
[b][size=150][color=#FFBF00]fuck the (self anointed) KING.[/color][/size][/b]
User avatar
abendx
Offroad Prophet
 
Posts: 3158
Joined: March 1st, 2010, 2:43 pm
Location: NARDIAN!

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Uncle Cracker » August 13th, 2013, 10:53 am

if i make it in time, i'll assist.

i'm not "professional" at anything :dontknow:
[size=150][/size]
User avatar
Uncle Cracker
I replaced my blood with mud!
 
Posts: 1730
Joined: June 24th, 2011, 10:28 am

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby AJ99 » August 13th, 2013, 4:09 pm

I'm down to help!!!
[color=#00FF00]"Jeeps and girls are alot alike, both get mad when you call them the "c word", both like to be rode hard, both of them are hard to control... Hell, the only difference between them is you can only fix one with a hammer." [/color]
User avatar
AJ99
I work to support my 4X4!
 
Posts: 786
Joined: August 13th, 2009, 3:02 pm
Location: Bakersfield

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby AJ99 » August 13th, 2013, 4:11 pm

Hey Matt Ill lend a hand with y'all if need be. We can use my jeep for the recovery demo. As in recovering mine.
[color=#00FF00]"Jeeps and girls are alot alike, both get mad when you call them the "c word", both like to be rode hard, both of them are hard to control... Hell, the only difference between them is you can only fix one with a hammer." [/color]
User avatar
AJ99
I work to support my 4X4!
 
Posts: 786
Joined: August 13th, 2009, 3:02 pm
Location: Bakersfield

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Lake_v2 » August 13th, 2013, 4:42 pm

What im looking at is keeping them simple and short,

5-10 minutes for the tire and jack

10-20Minutes for the winch

Start at 10am do a set every hour except during lunch stop when raffle is going.

Will have a board set up with times, but will be there to answer questions throughout the day

For the winch part will do what the army calls a dry fire, layout and demonstrate usage, but will not actually put any loads on a winch.

With the crouds seen at these events would be to easy for somone to be in wrong spot, crowd control is not my idea of fun. Neither is first aid lol.

Aj that would be great can have your jeep positioned in front of one of ours to hook to and setup rigging on
"Whitesnake"
Lake_v2
I work to support my 4X4!
 
Posts: 943
Joined: October 5th, 2010, 10:53 am

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Lake_v2 » August 13th, 2013, 4:48 pm

Ill get more details from frank on where we are setting up at but basic layout should be easy, need basically 5 parking spots of room.

My jeep in center, yours about 10 ft in front of it, easyup behind my jeep, rebeccas on other side of easy up.

Do jack demo with beccas, do tire demo with air comp from mine near/under easyup, and do winch demo in center of mine/ajs

Could use a second easyup for that spot.
"Whitesnake"
Lake_v2
I work to support my 4X4!
 
Posts: 943
Joined: October 5th, 2010, 10:53 am

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Lake_v2 » August 13th, 2013, 4:59 pm

Any suggestions?
"Whitesnake"
Lake_v2
I work to support my 4X4!
 
Posts: 943
Joined: October 5th, 2010, 10:53 am

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Repsolaaron » August 13th, 2013, 6:09 pm

I'm bringing my 30' trailer and a couple of fold out tables if that helps. Have bunk beds in the back for the kids too.

Sent from my SCH-M828C using Tapatalk 2
97 XJ rock crawler

[size=200]J[/size]ust [size=200]E[/size]mpty [size=200]E[/size]very [size=200]P[/size]ocket
User avatar
Repsolaaron
I work to support my 4X4!
 
Posts: 676
Joined: November 14th, 2011, 2:26 pm

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Repsolaaron » August 13th, 2013, 6:23 pm

Also I think a pot luck is a good idea for Saturday night.

Sent from my SCH-M828C using Tapatalk 2
97 XJ rock crawler

[size=200]J[/size]ust [size=200]E[/size]mpty [size=200]E[/size]very [size=200]P[/size]ocket
User avatar
Repsolaaron
I work to support my 4X4!
 
Posts: 676
Joined: November 14th, 2011, 2:26 pm

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Beck*A*Poo » August 14th, 2013, 7:06 am

Matt's Plan
You do not have the required permissions to view the files attached to this post.
[color=#FF0000]****** [size=150]BAD ASS GIRLS DRIVE BAD ASS JEEPS [/size]******[/color]

2000 JEEP WRANGLER TJ
User avatar
Beck*A*Poo
My bones have been replaced with sticks and rocks!
 
Posts: 1981
Joined: July 2nd, 2010, 6:39 am
Location: Bakersfield,Ca

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Uncle Cracker » August 14th, 2013, 12:15 pm

:wings: Roger = a demo on how to break a whole bunch of shit fast. :wings:
[quote]

well i'll be darned, i are a profesional :Thumb:
Last edited by Uncle Cracker on August 15th, 2013, 9:24 am, edited 1 time in total.
[size=150][/size]
User avatar
Uncle Cracker
I replaced my blood with mud!
 
Posts: 1730
Joined: June 24th, 2011, 10:28 am

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Goatman » August 14th, 2013, 10:12 pm

I will plan on being there. Wouldn't mind helping with a winch demo, I talk about it all the time with folks anyway. I'd be coming up for the day on Sunday. Can also show how to sew a badly cut tire with wire.

What other ideas are there for for things to do? I haven't been to one of these events yet.
Richard Gauthier
G[size=85]&[/size]G Off Road
G[size=85]&[/size]G Auto Repair
661-679-7957

'98 XJ
'89 XJ

[img]http://www.urfracing.com/forum/avatars/Jeeps/GoatMan.gif[/img]
Goatman
I work to support my 4X4!
 
Posts: 809
Joined: January 23rd, 2010, 6:23 pm
Location: Bakersfield

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Dirty LJ » August 14th, 2013, 10:24 pm

I have a canopy and will be there to help any way I can.

I know I could help with the MCing and the directing of the people to different things, getting people involved. We need to see if we can use 4wp PA system or if we will need our own. If we need to get one I an prob get one.

Sent from my Galaxy S3.
[url=http://www.infectiousoffroad.com][img]http://infectiousoffroad.com/InfectiousOffRoad_Banner.gif[/img][/url]
User avatar
Dirty LJ
Founder
 
Posts: 1741
Joined: January 5th, 2007, 9:50 pm
Location: Channel Islands, CA

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Beck*A*Poo » August 28th, 2013, 7:57 am

[quote="Dirty LJ"]I have a canopy and will be there to help any way I can.

I know I could help with the MCing and the directing of the people to different things, getting people involved. We need to see if we can use 4wp PA system or if we will need our own. If we need to get one I an prob get one.

Sent from my Galaxy S3.[/quote]


we also have a canopy but will need yours as well...more shade :P
[color=#FF0000]****** [size=150]BAD ASS GIRLS DRIVE BAD ASS JEEPS [/size]******[/color]

2000 JEEP WRANGLER TJ
User avatar
Beck*A*Poo
My bones have been replaced with sticks and rocks!
 
Posts: 1981
Joined: July 2nd, 2010, 6:39 am
Location: Bakersfield,Ca

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby 76foxx » August 29th, 2013, 3:36 pm

lol i can help break stuff. or with whatever needs helping
>_<
User avatar
76foxx
Getting a little Dirty
 
Posts: 52
Joined: January 18th, 2012, 7:07 pm
Location: bakersfield

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Beck*A*Poo » September 4th, 2013, 10:51 am

Talk to frank and hes letting us use there pa system :)
[color=#FF0000]****** [size=150]BAD ASS GIRLS DRIVE BAD ASS JEEPS [/size]******[/color]

2000 JEEP WRANGLER TJ
User avatar
Beck*A*Poo
My bones have been replaced with sticks and rocks!
 
Posts: 1981
Joined: July 2nd, 2010, 6:39 am
Location: Bakersfield,Ca

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Desert Dog » September 4th, 2013, 11:32 am

[quote="Beck*A*Poo"]Talk to frank and hes letting us use there pa system :)[/quote]
OOOOOHHHH. Im gonna recite the Matt&Becka poem on it :bleh:
I AM THE TITTY MASTER
User avatar
Desert Dog
Offroad Prophet
 
Posts: 3268
Joined: November 29th, 2009, 7:42 pm
Location: da dale

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Beck*A*Poo » September 4th, 2013, 2:05 pm

[quote="Desert Dog"][quote="Beck*A*Poo"]Talk to frank and hes letting us use there pa system :)[/quote]
OOOOOHHHH. Im gonna recite the Matt&Becka poem on it :bleh:[/quote]


Oh lord lol it was a sweet poem :)
[color=#FF0000]****** [size=150]BAD ASS GIRLS DRIVE BAD ASS JEEPS [/size]******[/color]

2000 JEEP WRANGLER TJ
User avatar
Beck*A*Poo
My bones have been replaced with sticks and rocks!
 
Posts: 1981
Joined: July 2nd, 2010, 6:39 am
Location: Bakersfield,Ca

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Uncle Cracker » September 9th, 2013, 3:45 pm

[quote="Lake_v2"]Myself and becca will have a small booth for the following

Trail jack, use, maintain, demo

Trail tire fix, plug sidewalls, ill bring old junk tire for multiple uses

Winch rigging, safety, recovery tips

Can use an extra hand with winch stuff[/quote]
we can lay my truck on it's side and demonstrate how to do a self recovery
and using other rigs to help you back to the up right position. possibly a
multi-winch pull> one to keep the roll back slow and controlled
just sayin
[size=150][/size]
User avatar
Uncle Cracker
I replaced my blood with mud!
 
Posts: 1730
Joined: June 24th, 2011, 10:28 am

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Uncle Cracker » September 9th, 2013, 3:53 pm

[quote="Goatman"]I will plan on being there. Wouldn't mind helping with a winch demo, I talk about it all the time with folks anyway. I'd be coming up for the day on Sunday. Can also show how to sew a badly cut tire with wire.

What other ideas are there for for things to do? I haven't been to one of these events yet.[/quote]
richard,, i have a "badly cut tire" if you need a prop for your tire sewing class
is it supposed to hold air when you're done? cuz i sawzalled the bead to get my
lock ring out.
i have it if you can use it
[size=150][/size]
User avatar
Uncle Cracker
I replaced my blood with mud!
 
Posts: 1730
Joined: June 24th, 2011, 10:28 am

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Beck*A*Poo » September 9th, 2013, 3:57 pm

[quote="Uncle Cracker"][quote="Lake_v2"]Myself and becca will have a small booth for the following

Trail jack, use, maintain, demo

Trail tire fix, plug sidewalls, ill bring old junk tire for multiple uses

Winch rigging, safety, recovery tips

Can use an extra hand with winch stuff[/quote]
we can lay my truck on it's side and demonstrate how to do a self recovery
and using other rigs to help you back to the up right position. possibly a
multi-winch pull> one to keep the roll back slow and controlled
just sayin[/quote]


Not enough room to do such a thing lol trying to keep it easy as 1 2 3 and not to hurt anyone with winchin but good idea
[color=#FF0000]****** [size=150]BAD ASS GIRLS DRIVE BAD ASS JEEPS [/size]******[/color]

2000 JEEP WRANGLER TJ
User avatar
Beck*A*Poo
My bones have been replaced with sticks and rocks!
 
Posts: 1981
Joined: July 2nd, 2010, 6:39 am
Location: Bakersfield,Ca

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Uncle Cracker » September 10th, 2013, 6:43 am

[quote="Beck*A*Poo"][quote="Uncle Cracker"][quote="Lake_v2"]Myself and becca will have a small booth for the following

Trail jack, use, maintain, demo

Trail tire fix, plug sidewalls, ill bring old junk tire for multiple uses

Winch rigging, safety, recovery tips

Can use an extra hand with winch stuff[/quote]
we can lay my truck on it's side and demonstrate how to do a self recovery
and using other rigs to help you back to the up right position. possibly a
multi-winch pull> one to keep the roll back slow and controlled
just sayin[/quote]


Not enough room to do such a thing lol trying to keep it easy as 1 2 3 and not to hurt anyone with winchin but good idea[/quote]

it would be a perfect time to talk about the dangers involved. since you will be directing
this class at the noobs, it should be no.1 topic.
you may talk about good/strong places to hook a vehicle, and where not to. but you may want to bring up snatch blocks and angles. anyone can pull a line out and hook to something. maybe bring up situations where straps should be used (trees,rocks ect.)
there are so many things to cover, and that's just part#1
you can't do a "quicky" winch class, there's to much involved
[size=150][/size]
User avatar
Uncle Cracker
I replaced my blood with mud!
 
Posts: 1730
Joined: June 24th, 2011, 10:28 am

Re: 4 WHEEL PARTS C.A.D. event planning thread

Postby Beck*A*Poo » September 10th, 2013, 7:37 am

it would be a perfect time to talk about the dangers involved. since you will be directing
this class at the noobs, it should be no.1 topic.
you may talk about good/strong places to hook a vehicle, and where not to. but you may want to bring up snatch blocks and angles. anyone can pull a line out and hook to something. maybe bring up situations where straps should be used (trees,rocks ect.)
there are so many things to cover, and that's just part#1
you can't do a "quicky" winch class, there's to much involved[/quote]


Yea matt and aj will be talking about winchin .... IM not directing lol im just there to help promote our club and maybe do the how to use a trail jack demo....... Its not a 2 min quicky seminar lol.... there will be To many people around for a actual full recovery … we need to be safe especially with the winch demo…. Roger you can join on the talking as well...
[color=#FF0000]****** [size=150]BAD ASS GIRLS DRIVE BAD ASS JEEPS [/size]******[/color]

2000 JEEP WRANGLER TJ
User avatar
Beck*A*Poo
My bones have been replaced with sticks and rocks!
 
Posts: 1981
Joined: July 2nd, 2010, 6:39 am
Location: Bakersfield,Ca

Next

Return to Off-Road

Who is online

Users browsing this forum: No registered users and 1 guest

cron